
Locked Bosch MD1 or MG1 ECU: unlocking
Your tool refuses to read an MD1CS003, an MG1CS042 or another recent Bosch ECU? It is locked. We unlock it by post to restore read and write access: 30 references supported, €200 excl. VAT, 48 to 72 h in the workshop, 1-year warranty.
Locked MD1 and MG1 ECUs: what you need to know
A locked Bosch MD1 (diesel) or MG1 (petrol) ECU is an engine ECU whose memory Bosch has protected: no tool can read or program it any more, neither through the OBD port nor on the bench. The protection affects some ECUs of the MDG1 generation, recent production in particular, often from 2020 on the MD1CS003 of Peugeot, Citroën and Opel or on Ford’s MD1CS005. The car drives normally: the lock only shows when a workshop wants to access the ECU.
At Incarline, we unlock your MD1 or MG1 ECU by post to restore read and write access. 30 references are supported, from the Peugeot 208 to the Porsche 911, including MAN, Iveco, Mercedes and DAF trucks. The ECU is handled within 48 to 72 hours, DHL collection and return included, with a 1-year warranty.
MD1, MG1, MDG1: what are they?
- Bosch MD1: diesel engine ECUs (MD1CS003, MD1CS004, MD1CP001…). “CS” and “CP” distinguish the hardware families, the number the variant.
- Bosch MG1: petrol and hybrid engine ECUs (MG1CS011, MG1CS042, MG1CP002…), on the same architecture.
- MDG1: the name of the generation covering MD1 and MG1. It succeeded the EDC17 and MED17 in the mid-2010s.
Not every MD1 or MG1 is locked. An ECU that reads normally does not need this service: for a faulty ECU, see our engine ECU cloning or our ECU repair page.
How do you know if your MD1 or MG1 is locked?
The lock always shows when you try to access the ECU. These signs are unmistakable.
Reading refused by OBD
Your tool recognises the ECU but refuses to read it through the diagnostic port, or stops and reports a protection.
Reading refused on the bench too
Even with the ECU removed and connected on the bench, reading fails. That is the signature of a locked MD1 or MG1.
Reference marked “locked”
In tool compatibility lists, the reference appears marked “Locked” or “protected” from a certain software version onwards.
Recent ECU
The ECU is a recently produced MD1 or MG1. Early versions of some references can still be read normally.
Backup impossible
You cannot back up the ECU data before a repair or a replacement.
Replacement blocked
The original data cannot be retrieved to prepare a replacement ECU of the same reference.
What does unlocking an MD1 or MG1 ECU allow?
Unlocking restores read and write access to a locked MD1 or MG1 ECU. Once unlocked, the ECU can be read and programmed on the bench again. In practice, it becomes possible to:
- back up all of its data before a repair, a replacement or shipping;
- prepare a replacement ECU when the reference allows it (see the table below);
- carry out your usual work reading and writing on the bench, with your own equipment.
Unlocking only
You send us your locked ECU, we return it unlocked, readable and programmable on the bench. This service is available on all 30 references.
Unlocking, then cloning
On references where cloning is reliable, we then transfer the data to an ECU of the same reference. Cloning does not exist for most MD1 and MG1 units: we tell you before you send anything.
Which ECU references do we unlock?
Incarline unlocks 30 engine ECU references: 28 Bosch MD1 and MG1, the Bosch CPC5 and the Delphi ETC3. The “Cloning” column shows whether a transfer to another ECU is possible after unlocking.
“Case by case”: cloning is only validated on some versions of the ECU. Send us the full reference and software version before shipping.
Cars and vans
| Reference | Engine | Vehicles fitted (examples) | Cloning |
|---|---|---|---|
| Bosch MD1CS003 | Diesel | Peugeot 208, 2008, Partner, Rifter, Expert · Citroën C3 Aircross, C4, Berlingo, Jumpy · Opel Corsa, Astra, Combo, Vivaro · DS 3, DS 7 · Toyota Proace City · Fiat | No, unlocking only |
| Bosch MG1CS032 | Petrol | Peugeot 208, 2008 · Opel Corsa, Mokka · DS 3 Crossback · Citroën C4 · Jeep Avenger | Case by case |
| Bosch MG1CS042 | Petrol | Peugeot 308, 3008, 5008, 508 · Citroën C5 Aircross · DS 7 Crossback, DS 9 · Opel Grandland X | No, unlocking only |
| Bosch MD1CS004 | Diesel | Volkswagen Golf, Caddy · Audi A3 · Seat Leon, Tarraco · Skoda Octavia · Cupra Formentor, Leon · Ford Tourneo Connect | No, unlocking only |
| Bosch MD1CS014 | Diesel | Audi A4, A5, A6, A7, Q7 · Volkswagen Touareg | No, unlocking only |
| Bosch MG1CS011 | Petrol | Volkswagen Golf, Tiguan, Arteon, Caddy · Audi A1, A3, A4, A5, Q2 · Skoda Fabia, Kamiq, Karoq, Superb · Seat Leon, Arona · Cupra Formentor | No, unlocking only |
| Bosch MG1CS111 | Petrol | Volkswagen Arteon, Tayron · Audi A1, A3, A4, A5, Q2 · Skoda Karoq, Kodiaq, Octavia, Superb · Seat Ateca, Leon · Cupra Formentor | Case by case |
| Bosch MG1CS031 | Diesel and petrol | Audi A1, A3, A4, A5, Q2 · Volkswagen Golf, Passat, Polo, Tiguan, Arteon · Skoda Octavia, Kodiaq, Karoq, Superb · Seat Ateca, Leon · Cupra Formentor | No, unlocking only |
| Bosch MG1CS163 | Petrol | Audi RS3, RS Q3 · Cupra Formentor VZ5 · Bentley Bentayga Speed, Continental GT, Flying Spur | Case by case |
| Bosch MG1CS002 | Petrol | Porsche Cayenne, Panamera (incl. E-Hybrid) · Audi A6, A7, A8, Q7, Q8 · Bentley Bentayga, Flying Spur · Volkswagen Touareg | Case by case |
| Bosch MG1CS008 | Petrol | Porsche Cayenne, Panamera (S, GTS, Turbo) · Audi RS6, RS7, RS Q8, S8, A8 · Bentley Bentayga, Continental GT · Lamborghini Urus | Case by case |
| Bosch MG1CP007 | Petrol | Porsche 911 Carrera (992), 718 Boxster and Cayman GTS 4.0, Spyder | No, unlocking only |
| Bosch MG1CS047 | Petrol | Porsche 911 GT3, GT3 RS, 718 Cayman and Boxster GT4 RS | No, unlocking only |
| Bosch MD1CP001 | Diesel | Mercedes C-Class, E-Class, GLC, GLE, Sprinter | No, unlocking only |
| Bosch MG1CP002 | Petrol | Mercedes A-Class, C-Class, S-Class, GLE, AMG GT · Aston Martin DBX · Lotus Emira | Case by case |
| Bosch MD1CP007 | Diesel | Land Rover Discovery, Defender, Range Rover, Range Rover Sport, Velar · Jaguar F-Pace | Case by case |
| Bosch MD1CP017 | Diesel | Jaguar E-Pace, F-Pace, XE, XF · Land Rover Discovery Sport, Range Rover Evoque, Velar | No, unlocking only |
| Bosch MG1CS028 | Petrol | Land Rover Range Rover, Range Rover Sport, Defender, Discovery, Velar · Jaguar E-Pace, F-Pace · Maserati Levante, Ghibli | No, unlocking only |
| Bosch MD1CS005 | Diesel | Ford Focus, Kuga, Puma, Transit Connect, Tourneo Connect | No, unlocking only |
| Bosch MD1CP061 | Diesel | Ford Ranger · Volkswagen Amarok | No, unlocking only |
| Bosch MD1CP006 | Diesel | Ford F-250, F-350, F-450 Super Duty | No, unlocking only |
| Bosch MD1CS012 | Diesel | Hyundai Palisade, Staria · Kia Sorento, Bongo · Genesis G70, G80, GV70, GV80 | No, unlocking only |
Trucks
| Reference | Engine | Vehicles fitted (examples) | Cloning |
|---|---|---|---|
| Bosch MD1CE100 | Diesel | MAN TGX, TGM, TGL | No, unlocking only |
| Bosch MD1CE101 | Diesel | Iveco S-Way, Eurocargo · New Holland, Case IH, Steyr, Landini (tractors and combines) | No, unlocking only |
| Bosch MD1CE102 | CNG | Iveco S-Way CNG | No, unlocking only |
| Bosch CPC5 | Diesel | Mercedes-Benz Actros, Arocs, Atego · Freightliner Cascadia · Western Star | Yes |
| Delphi ETC3 | Diesel | DAF CF, XF | Yes |
Tractors, farm machinery and light commercials
| Reference | Engine | Vehicles fitted (examples) | Cloning |
|---|---|---|---|
| Bosch MD1CS069 | Diesel | New Holland T4, T5 · Landini · McCormick · Massey Ferguson · John Deere 5G · Fiat Ducato · Iveco | Case by case |
| Bosch MD1CS089 | Diesel | Same, Deutz-Fahr, Lamborghini (tractors) · Isuzu D-Max · Maxus · JAC · JMC | No, unlocking only |
Leisure and marine
| Reference | Engine | Vehicles fitted (examples) | Cloning |
|---|---|---|---|
| Bosch MG1CA920 | Petrol | Sea-Doo (personal watercraft) · Can-Am Maverick, Defender · Ski-Doo | Case by case |
Your reference is not listed? Write to us: the list grows regularly.
Locked ECU or immobiliser lock-out: do not confuse them
The word “locked” covers two very different faults.
Locked MD1 / MG1
The car starts and drives normally. Access to the ECU is what is blocked: no tool can read or program it. That is what this page is about.
ECU blocked by the immobiliser
The engine does not start, often with the immobiliser light on (a well-known case on “locked” Renault Clio 2 models). See our Renault PIN code or our immobiliser service.
How does unlocking your ECU work?
You order online
Pick your reference (MD1CS003, MG1CS042…) on the service page: €200 excl. VAT, DHL collection and return included. For cloning on top, ask us before shipping.
DHL collects the ECU
The engine ECU only, removed from the vehicle and well packed. Collection is included.
We unlock the ECU
Our workshop works on the bench within 48 to 72 hours of receipt.
Returned by DHL, 1-year warranty
The unlocked ECU is returned by DHL, ready to be refitted or programmed, with a 1-year warranty.
Why entrust your MD1 or MG1 to Incarline?
30 references supported
MD1 and MG1 from Stellantis, the Volkswagen group, Porsche, Mercedes, Jaguar Land Rover, Ford, Hyundai and Kia, plus trucks and farm machinery.
A straight answer on cloning
We tell you before shipping whether your reference can be cloned. On most MD1 and MG1 units the answer is no, and we do not sell what does not work.
48 to 72 h in the workshop
The ECU is handled as soon as it arrives, then returned by DHL.
Transport included
DHL collection and return included, anywhere in France.
1-year warranty
The unlocking is guaranteed for one year from receipt of the ECU.
Cars, trucks, farm machinery
The same service for an MD1CS003 from a Peugeot 208, an MD1CE101 from an Iveco or New Holland, or a CPC5 from a Mercedes Actros.
See also our Bosch MD1 ECUs and Bosch MG1 ECUs, or our ECU cloning service.
They recommend us
Read the feedback from drivers and garages who have used our workshop.
Frequently asked questions about MD1 / MG1 unlocking
What is a locked MD1 or MG1 ECU?
Bosch MD1 refers to the diesel engine ECUs and Bosch MG1 to the petrol engine ECUs of the MDG1 generation, fitted since the mid-2010s. On some of these ECUs, and on recent production in particular, Bosch added a protection that blocks reading and writing of the memory: diagnostic and programming tools then refuse to read it, by OBD as well as on the bench. This is what is called a “locked” ECU.
What does unlocking an MD1 or MG1 ECU allow?
Unlocking restores read and write access to the ECU. It becomes possible to back up all of its data, to prepare a replacement or a clone when the reference allows it, and then to carry out the usual bench read and write work with your own equipment.
Which ECU references do you unlock?
Incarline unlocks 30 references: from Bosch, the MD1CS003, MD1CS004, MD1CS005, MD1CS012, MD1CS014, MD1CS069, MD1CS089, MD1CP001, MD1CP006, MD1CP007, MD1CP017, MD1CP061, MD1CE100, MD1CE101, MD1CE102, MG1CS002, MG1CS008, MG1CS011, MG1CS028, MG1CS031, MG1CS032, MG1CS042, MG1CS047, MG1CS111, MG1CS163, MG1CP002, MG1CP007, MG1CA920 and CPC5, and from Delphi the ETC3. They are fitted to cars (Peugeot, Citroën, DS, Opel, Volkswagen, Audi, Skoda, Seat, Cupra, Porsche, Mercedes, Land Rover, Jaguar, Ford, Hyundai, Kia), trucks, tractors and leisure vehicles.
Can an MD1CS003 or MG1CS042 be cloned after unlocking?
No, not at this time. On the Stellantis MD1CS003 and MG1CS042, as on most MD1 and MG1 units, no reliable cloning to another ECU exists today. We therefore do not offer it: unlocking gives you access to the data, not a clone. Cloning is offered on the CPC5 and ETC3 truck ECUs, and assessed case by case on nine other references, shown in our table.
Does the ECU work normally after unlocking?
Yes, the ECU is returned in working order and refits to the original vehicle. Unlocking concerns access to its memory: it does not change how the engine behaves.
Is a locked ECU the same as an immobiliser lock-out?
No. A “locked” ECU in the MD1/MG1 sense refuses to be read or programmed by a tool, but the car starts normally. An ECU blocked by the immobiliser, as on some Renault Clio 2 models, prevents the engine from starting: that is a different problem, solved with the PIN code or work on the immobiliser.
Do I send the ECU or the car?
Only the engine ECU, removed from the vehicle. DHL collection and return are included. We work on the bench, without the vehicle.
How long does unlocking take?
Allow 48 to 72 hours of work after the ECU reaches our workshop, plus DHL transport both ways.
How much does unlocking an MD1 or MG1 ECU cost?
€200 excl. VAT (€240 incl. VAT), whatever the supported reference, from the MD1CS003 to the MG1CS042. The price includes DHL collection and return and the 1-year warranty. You order online and send us your ECU directly.
Is your MD1 or MG1 ECU locked?
€200 excl. VAT for all 30 supported references, DHL collection and return included, 1-year warranty. Order online and send us your ECU directly.
