Unlocking of locked Bosch MD1 / MG1 ECUs
A locked Bosch MD1 (diesel) or MG1 (petrol) ECU refuses any reading or programming, through the OBD port as well as on the bench. Bosch has protected the memory of some ECUs of the MDG1 generation, recent production in particular: often from 2020 on the MD1CS003 of Peugeot, Citroën and Opel or on Ford's MD1CS005. The car drives normally, but no tool can access the ECU any more.
At Incarline, we unlock your ECU by post to restore read and write access. It is returned to you readable and programmable on the bench, within 48 to 72 h of receipt, DHL collection and return included, with a 1-year warranty.
30 references supported
- Stellantis: MD1CS003, MG1CS032, MG1CS042 (Peugeot, Citroën, DS, Opel, Fiat, Jeep, Toyota Proace City)
- Volkswagen group: MD1CS004, MD1CS014, MG1CS002, MG1CS008, MG1CS011, MG1CS031, MG1CS111, MG1CS163 (Volkswagen, Audi, Skoda, Seat, Cupra, Bentley, Lamborghini)
- Porsche: MG1CP007, MG1CS047 (911, 718), as well as the MG1CS002 and MG1CS008 of the Cayenne and Panamera
- Mercedes-Benz: MD1CP001, MG1CP002
- Jaguar Land Rover: MD1CP007, MD1CP017, MG1CS028
- Ford: MD1CS005, MD1CP006, MD1CP061 (also on the Volkswagen Amarok)
- Hyundai, Kia, Genesis: MD1CS012
- Trucks: MD1CE100 (MAN), MD1CE101 and MD1CE102 (Iveco), Bosch CPC5 (Mercedes-Benz Actros, Arocs), Delphi ETC3 (DAF)
- Farm machinery and light commercials: MD1CS069, MD1CS089 (New Holland, Case IH, Same, Deutz-Fahr, Landini, Isuzu…)
- Leisure and marine: MG1CA920 (Sea-Doo, Can-Am, Ski-Doo)
Unlocking only, or followed by cloning
- Unlocking only: available on all 30 references. You get your ECU back unlocked, to back up its data or carry out your bench read and write work.
- Unlocking, then cloning: available on the Bosch CPC5 and Delphi ETC3. Case by case, before shipping, for the MG1CS002, MG1CS008, MG1CS032, MG1CS111, MG1CS163, MG1CP002, MG1CA920, MD1CP007 and MD1CS069, depending on the ECU version.
- No cloning on the other references, including the Stellantis MD1CS003 and MG1CS042: no reliable cloning exists today, so we do not offer it.
How it works
- You order online by picking your ECU reference: €200 excl. VAT, DHL collection and return included.
- DHL collects the engine ECU, removed from the vehicle.
- We unlock it on the bench within 48 to 72 h of receipt.
- It is returned by DHL, ready to be refitted or programmed, with a 1-year warranty.
Good to know before shipping
- Not every MD1 or MG1 is locked: if your tool reads the ECU normally, you do not need this service.
- A “locked” ECU does not stop the car from starting. If the engine will not start because of the immobiliser, that is a different problem (PIN code, immobiliser).
- Give the full reference and, if possible, the software version of the ECU.
To understand it all, read our article: locked Bosch MD1 or MG1 ECU: unlocking, with the full table of references and vehicles fitted.

