Back to Bosch MG1

Bosch MG1CP002 Engine ECU — tested used part, guaranteed

ECM Bosch MG1CP002
ecm

The ECM Bosch MG1CP002 is an engine ECU from the Bosch MG1 range designed to precisely control a modern petrol engine. The part offered here is a tested used unit by Incarline and sold as is, without prior coding or pairing. After installation, coding is mandatory at a professional workshop equipped to associate the ECM Bosch MG1CP002 with the vehicle's immobilizer (and VIN). Our quality control checks the physical integrity, connectivity, and basic communication on the bench to ensure the supply of a functional ECU before vehicle adaptation. If you need to lift a lock preventing reading/writing, an optional Bosch MD1/MG1 unlocking service is available via the configurator. Choose the ECM Bosch MG1CP002 from Incarline to benefit from a tested unit covered by our warranty, ready to be coded by your garage.

Overview

The engine ECU (ECM) Bosch MG1CP002 is part of the Bosch MG1 generation used on many direct injection petrol engines. Its role is to manage in real-time the injection, ignition, boost pressure, sensor regulation, and engine safety based on a network of sensors and actuators. It communicates with other ECUs via the vehicle's multiplexed network to ensure coherent operation of the entire powertrain.

This Bosch MG1 architecture integrates security and immobilizer mechanisms. Consequently, any replacement with an ECM Bosch MG1CP002 requires professional coding to associate the unit with the vehicle. The ECM Bosch MG1CP002 offered here is a tested used part from the same Bosch MG1 family, supplied raw and sold as is. Its software adaptation (coding/pairing) is not included and must be performed by a workshop with the appropriate tools and access. This is the condition for compliant starting and operation.

Compatible Vehicles & Identification

The Bosch MG1CP002 is used in recent petrol engines utilizing Bosch MG1 type management. Specific manufacturers and models vary according to hardware and software variants. To avoid any error, compatibility is verified exclusively by the references on the ECU label and connector matching. Incarline recommends checking the identifiers on your original unit and matching them with the offered ECM Bosch MG1CP002.

How to verify it's the correct reference? Keep your old ECU and compare:

  • The family mention on the label (MG1CP002) and the Bosch brand.
  • The Bosch number (usually in the format 0 261 xxx xxx or equivalent) and, if available, the OEM reference from the manufacturer.
  • The hardware/software index printed on the label (HW/SW) when present.
  • The shape of the casing and connector layout (number of pins, keying).

Only a strict match of the family (Bosch MG1CP002) and references ensures correct integration after coding. If any doubt persists, send clear photos of the label for confirmation before purchase. This avoids incompatibilities related to Bosch MG1 range variants.

Your ECU at Incarline

This Bosch MG1CP002 unit is a tested used part sold as is. Each ECU undergoes a visual inspection (casing condition, absence of oxidation, intact connectors) and a basic communication test on the bench to validate power supply and electronic wake-up. This protocol aims to deliver a functional ECM Bosch MG1CP002 ready for adaptation. The part is covered by the Incarline warranty, ensuring peace of mind during your used purchase.

Important: coding is mandatory. The ECM Bosch MG1CP002 cannot start a vehicle without pairing the immobilizer and VIN by a qualified professional. The unit is supplied raw, uncloned, and unprogrammed by default. If you encounter a read/write block due to a lock, you can add an optional service to the cart: unlocking locked Bosch MD1/MG1 ECU (unlock). This service is done by sending, at a rate of €200 excl. VAT, covering about thirty MD1/MG1 references (e.g., MD1CS003, MG1CS042…), with an announced lead time of 48–72 hours, DHL shipping included, and 1-year warranty. It is not automatic: it must be selected in the configurator. No other service (cloning, programming, virginization, immo-off, exchange, etc.) is included or offered on this reference via this product page.

Frequently asked questions

How to verify the compatibility of the Bosch MG1CP002 with my vehicle?▶
Check the label on your old ECU: the family (MG1CP002), the Bosch brand, the Bosch number, and if present, the HW/SW index and OEM reference. Also compare the shape and connectors. A strict match of references is essential before purchase.
Is the Bosch MG1CP002 ECU delivered programmed or cloned?▶
No. It is a tested used part, sold as is: no coding, cloning, or pairing is done by default. After installation, professional coding is mandatory to associate it with the vehicle's immobilizer and VIN.
Is this Bosch MG1CP002 tested and guaranteed?▶
Yes. Incarline checks the physical integrity and basic communication on the bench before shipment, and the part is covered by the Incarline warranty. Vehicle coding remains to be done by a professional after receipt.
Can an MD1/MG1 unlocking service be added to the order?▶
Yes. Optionally via the configurator: unlocking locked Bosch MD1/MG1 ECU (unlock) by sending, €200 excl. VAT, about 30 references covered (e.g., MD1CS003, MG1CS042…), announced lead time 48–72 hours, DHL included, 1-year warranty. This service is independent of the ECU purchase.
Will the Bosch MG1CP002 allow my vehicle to start immediately?▶
No. Without coding/pairing by an equipped professional, the immobilizer will block starting. The Bosch MG1CP002 must be coded for your vehicle after installation.
Can I install this Bosch MG1CP002 myself?▶
You can perform the physical installation if you are experienced, but the ECM must be coded by a professional with the appropriate tools and access. Without this step, the vehicle will not start.
Is this Bosch MG1CP002 a new or used part?▶
It is a tested used part. It is sold as is, unprogrammed, with Incarline warranty. Specific coding for your vehicle remains to be arranged with a professional.
What does the shipment of the Bosch MG1CP002 include?▶
The electronic unit only. No harness, support, code, or coding instructions are included. Plan for a professional intervention for pairing after installation.
From200,00 € HTsoit 240,00 € TTCOut of stock