Bosch ME7.4.4 PSA engine ECU tested — used part

Used Bosch ME7.4.4 ECU, from the Bosch ME7 range. This is an engine control unit (ECU) intended for PSA/Stellantis group vehicles (Peugeot, Citroën). The part is bench-tested before shipment and sold as-is, not coded for your vehicle. To start the engine, coding/pairing to the immobilizer and VIN is MANDATORY, to be performed via an optional service or by an equipped professional. Available references below (HW/SW) to verify compatibility with your original unit. This Bosch ME7.4.4 is a cost-effective alternative to new, while remaining a sound base for compliant adaptation on your car. Please carefully check the markings on the label and the unit before ordering.
Overview
The Bosch ME7.4.4 engine ECU is the electronic unit that oversees injection, ignition, throttle control, and coordination of engine actuators. Part of the Bosch ME7 family, it processes sensor information (temperature, pressure, position, airflow, etc.) in real-time to adjust engine operation for stable and efficient combustion. It also ensures communication with other modules via the vehicle network and manages immobilizer-related authentication.
In a PSA/Stellantis group vehicle, the Bosch ME7.4.4 plays a central role: without correct pairing, the engine will not start. Therefore, any replacement requires electronic adaptation. This reference is offered here as a used part, bench-tested, ready to be coded to join your vehicle architecture after verifying hardware and software compatibility.
Your ECU at Incarline
This Bosch ME7.4.4 is offered as a used part, bench-tested before shipment. It is sold as-is, not coded and not programmed for your car. A functional check is performed to validate communication and essential ECU functions under simulated conditions. Applicable warranty terms are specified at the time of order on the product page.
For integration into your PSA/Stellantis vehicle, coding/pairing is MANDATORY. Depending on your needs, options can be added to the cart via the configurator (e.g., cloning, programming, or immobilizer-related solutions), or the intervention can be performed by a workshop with the appropriate tools. Finally, to avoid any errors, we recommend confirming the exact HW/SW references of the Bosch ME7.4.4 before purchase and planning the necessary electronic intervention during installation.
Frequently asked questions
How do I know if the Bosch ME7.4.4 is compatible with my PSA/Stellantis vehicle?▶
Is the Bosch ME7.4.4 ECU delivered programmed for my vehicle?▶
Is the used Bosch ME7.4.4 tested and does it come with a warranty?▶
Can I have a Bosch ME7.4.4 purchased here cloned or programmed?▶
What markings should I check on a Bosch ME7.4.4 before ordering?▶
Is immobilizer coding required on a used Bosch ME7.4.4?▶
Can I replace my Bosch ME7.4.4 with a close reference if the HW is not identical?▶
Compatible vehicles
This ECU is fitted to the following vehicles, among others. Check the exact reference of your unit before ordering.
- Citroen Berlingo (B9)
- Citroen C2 (A6)
- Citroen C3 (A8)
- Citroen C3 Pluriel (A42)
- Citroen C4 (B5)
- Citroen C5 (X4)
- Citroen C8 (V3)
- Citroen Saxo (S8)
- Citroen Xsara (N7)
- Peugeot 1007 (A08)
- Peugeot 106 (S2)
- Peugeot 306 (T5)
- Peugeot 307 (T5)
- Peugeot 308 (T7)
- Peugeot 406 (D9)
- Peugeot 407 (D2)
- Peugeot 607 (Z9)
- Peugeot 807 (V2)
- Peugeot Partner (B9)
- Peugeot Ranch (M5)
- Polaris FS --
- Polaris FST --
- Polaris MSX --
Supported references (3)▶
Check that your ECU's reference appears in the list.
- 0261206606PSA / StellantisSW: 9638765980, 9638765980 id06, 9638765980 id10
- 0261206943PSA / StellantisSW: 9657499880, 9638765680
- 0261208101PSA / StellantisSW: 9648482980
