REPAIRAvailable online60 min

Airbag ECU Reset After Accident

Airbag ECU Reset After Accident

Airbag ECU Reset After Accident

After an impact, even a minor one, your vehicle's airbag ECU records a crash code that permanently locks it. Consequence: the airbags will not redeploy, the SRS light remains on, and in many cases, your vehicle may even refuse to start until the ECU has been addressed.

At Incarline, we reset your original ECU to erase the crash data and stored fault codes after deployment. Your module is restored to a like-new state, ready to be reinstalled in your vehicle — with no additional remapping required.

Why not replace with a new or used part?

  • New dealer part: €500 to €1,500 depending on the model, plus mandatory programming
  • Used part: high risk — these ECUs often already contain uncleared crash data from the previous accident vehicle, invisible to the naked eye
  • Incarline reset: €149 ex. VAT (€178.80 incl. VAT), DHL pickup included, return within 24 to 48 business hours, 1-year warranty

Supported Brands and OEM References

We service the vast majority of airbag ECUs on the market. Find your OEM reference below (usually printed on the label affixed to the top of the unit):

Bosch

Series 0285010xxx, 0285011xxx, 0285012xxx — widely used by Peugeot, Citroën, Dodge, and other manufacturers. Exact supported references:

  • 0285010554 · 0285010555 · 0285010556 · 0285010702 · 0285010703
  • 0285010745 · 0285010828 · 0285010829 · 0285011181
  • 0285011402 · 0285012006 · 0285012193 · 0285012632
  • 0285012189 · 0285012924 · 0285012338 (Dodge Ram)

Continental (ex-Siemens VDO)

  • 9675127080 · 9677910680 (PSA Peugeot Citroën)
  • 38910-68K10 (Suzuki Alto)

Siemens

  • 5WK43154 · 5WK43349

Temic

  • 1496758080 · 7367A6 · 9663176580 · 89170-0H040
  • 402107B4 · 402787B5 · 402787B7 · 402792B7 (Renault)

TRW

  • 89170-0H040 (Toyota)

Specific Vehicle References

  • 608989500 (Citroën C5)
  • 623174200B · 630429300 · 89170-0H130

Over 12,000 OEM references supported, at a flat rate of €149. The list above is just a sample: use the checker at the top of the page to immediately find out if your ECU is supported. If your reference is not recognized, send us a clear photo of the label via our contact form — we confirm feasibility for free within 24 business hours.

⚠️ Safety — battery disconnection mandatory

The airbag ECU contains motion sensors. Handling it while the battery is connected — during removal or reinstallation — can be interpreted as an impact and trigger airbag deployment. At close range, a deploying airbag can cause serious injuries.

Therefore, disconnect the battery before removing the ECU, allow the circuit to discharge, and only reconnect it once the module is reinstalled and reconnected. This precaution applies in both directions: reconnection is the most often neglected moment, and it is one of the riskiest.

How It Works

  1. Order the service on our site (€149 ex. VAT, €178.80 incl. VAT)
  2. Remove your airbag ECU (under the passenger seat or central console depending on the model) or book an appointment at the workshop
  3. DHL collects the package from your location at the date and time you choose (pickup included in the price)
  4. Diagnosis and reset within 24 to 48 business hours in our workshop
  5. Return of your ECU by us, ready to reinstall — plug & play

Important to Know

This service is intended for an ECU damaged by impact. If your ECU is physically destroyed (immersion, severe short circuit), contact us for a preliminary diagnosis.

The reset erases crash data in accordance with automotive electronics practices. The airbags themselves (cushions + pretensioned belts) must be replaced by an authorized garage after deployment — we only work on the ECU.

Why choose Incarline?

Recognised expertise

Automotive electronics specialist

1-year warranty

Parts and labour included

48-72h turnaround

From receipt at our workshop

Frequently asked questions

Answers to the questions we receive most often.

  • The "crash reset" (or crash data reset) involves erasing the fault codes recorded in the airbag ECU after the airbags deploy following an accident. The ECU automatically locks by writing a "crash code" in its flash memory, preventing any future deployment and often blocking the vehicle from starting. The operation involves resetting this memory to zero via direct access to the ECU's EEPROM.