Delphi ETC

Delphi ETC3: the engine ECU for DAF CF and XF trucks

Delphi ETC3 engine ECU for DAF CF and XF trucks: unlocking at €200 excluding VAT to restore reading and writing, cloning to an ETC3 of the same reference.

1 references availableRepair · Used units · Reprogramming1-year warranty

The Delphi ETC3 is the diesel engine ECU for recent DAF CF and XF trucks. It manages injection and engine operation, and retains the truck's identity. In recent versions, its reading and writing are locked: without unlocking, data cannot be saved or transferred to another ETC3.

Find your exact reference

Search by hardware reference, software reference or control unit name. Click a result to configure and order without leaving the page.

1 reference

The Delphi ETC3 on DAF

The ETC3 is equipped on DAF CF and XF, with 10.8 l and 12.9 l diesel engines. It controls injection, communicates with other truck ECUs via the CAN network, and retains the chassis number and engine parameters. Its reference is read on the case label (DAF number and Delphi number).

Why an ETC3 needs to be unlocked

Recent ETC3s leave the factory with protection that blocks reading and writing access by usual means. As long as it is active:

  • it is impossible to save the ECU data before an intervention;
  • it is impossible to prepare a replacement ETC3 of the same reference from the original data;
  • it is impossible to recover the truck's identity and parameters if the ECU needs to be changed.

Unlocking restores this access permanently, without altering engine operation.

What Incarline offers on the ETC3

  • Unlocking: €200 excluding VAT, regardless of the reference. You order online and send us the ECU. See the ECU unlocking service.
  • Cloning: once the original ECU is readable, its data can be transferred to an ETC3 of the same reference. Contact us with the complete reference of your case.

We do not modify engine performance: unlocking and cloning retain the original software and parameters.

Frequently asked questions

Which trucks are equipped with the Delphi ETC3?
Recent DAF CF and XF, with 10.8 l and 12.9 l diesel engines. The exact reference is read on the case label.
Why can't my ETC3 be read?
Recent versions are factory locked: reading and writing are blocked by usual means. Unlocking restores this access.
How much does unlocking an ETC3 cost?
€200 excluding VAT (€240 including VAT), regardless of the reference. The order is placed online, then you send us the ECU.
Can an ETC3 be cloned?
Yes, once the original ECU is unlocked: its data is transferred to an ETC3 of the same reference. Send us the complete reference of your case to check compatibility.
Does unlocking change the engine's behavior?
No. It only restores reading and writing access. The original software and parameters are retained.

Your reference isn’t listed?

Contact us — we can source your control unit or handle your repair on a quote basis.

Contact us